PVC Door le Window Profile Extrusion Line
Tlhahlobo ea morero
Ho latela tlhoko ea hau, re rata ho khothaletsa rona SJZ65/132 PVC Profile Extrusion Line.Mohala ona oa extrusion o entsoe ka SJZ65/132 Conical Twin-screw Extruder le mochini oa mothusi oa tlase.Ka kopo, sheba lintlha tse ka tlase:
1.1 Litšobotsi tsa lintho tse bonahalang
1.1.1 boitsebiso bo thehiloeng:
- PVC phofo:
- CaCo3:
1.1.2 Tlatsetso:
- Ho kopanya
- Setlolo
- 1.1.3 Foromo ea lintho tse bonahalang
- Lisebelisoa tsohle li lokela ho tsoakoa ka ho feletseng.
Sehlahisoa se felileng: Profile ea PVC;
Bokhoni ba tlhahiso: 150 ~ 250kg/h (ho ipapisitse le lihlahisoa tse felileng
Mohala oohle oa tlhahiso o kenyelletsa:
polasetiki
Tlhaloso ea tekheniki
SJZ65/132 PVC Profile extrusion line
| Che. | Lebitso | Setšoantšo sa mochine | Qty. | Litlhaloso tsa tekheniki | |
| 1 | Lisebelisoa tsa ZJ300 |  | 1 | E lekantsoe matla a phetisetso: 300kg/h | |
| Matla a motlakase: 1.5kw Bophara ba selemo: Φ36mm Boitsebiso: Tšepe e sa hloekang | |||||
| 2 | SJZ65/132 conical twin-screw extruder |  | 1 | 2.1 sekoti 2.2 moqomo 2.3 ho khanna koloi 2.4 mokhoa oa ho fepa 2.5 Sistimi ea Vacuum 2.6 Adapter 2.7 Khabinete ea mantlha ea motlakase Mokhoa oa ho itšireletsa | |
| 2.1 Screw:bophara ba conical 65/ 132 limilimithara bakeng sa drainpipe ea PVC le phala ea phepelo ea metsi. Lintho tse bonahalang tsa screw: 38CrMoAl Phekolo ea sefahleho: Ts'ebetso ea nitriding, botenya: 0.6 ~ 0,8mm, ho penta Lebelo le potolohang (counter rotating): 1-34.7 rpm / min 2.2 Barrel: bophara ba conical 65/132 Ho sebetsa ka hare: nitrided le botenya: 0.6 ~ 0.8mm Libaka tsa ho futhumatsa: 4 Mokhoa oa ho futhumatsa: Cast alumina + sekoaelo sa tšepe e sa hloekang Matla a ho futhumatsa: 22kw Mokhoa oa ho pholisa: Fans ea moea: 3 Sets 2.3 Enjene ea ho khanna: Matla a motlakase: 37kw Mofuta oa motlakase = AC 2.4 Sistimi ea ho fepa: Sistimi ea phepelo ea matla a khoheli le screw Ka hopper ea tšepe e sa hloekang Sistimi ea phepelo ea dosing: Motlakase: 1.5kw Sleeve ea ho fepa ka ho pholisa metsi a chitja 2.5 Sistimi ea Vacuum dehumidifying: Pompo ea vacuum: 1 sete Vacuum degree = 0 ~ 0.075 Mpa 2.6 Adaptara: (Karolo ea Phallo): Lintho tse bonahalang: #40steel Chrome plated, e ka hare ea converrgent mofuta oa phallo Mokhoa oa ho hokahanya le die: clamping block + bolt Sensor e qhibilihisang khatello le thermocouple 2.7 Mofani oa karolo ea mantlha ea motlakase: Inverter: ABB kapa DELATA Mohokahanyi: Schneider kapa SIEMENS Phetoho ea moea: Schneider Relay: Omron Taolo ea mocheso: RKC 2.8 Sistimi ea ho itšireletsa: Tšireletso e fetang hona joale ea motlakase Tšireletso e fetang khatello ea screw. | |||||
| 3 | YF240 Sethala sa Calibration |  | 1 | 3.1 Boemo ba bokantle 3.2 Pompo ea vacuum 3.3 Pompo ea metsi 3.4 Liphetoho tse tharo tsa tataiso: Karolo ea metsi ea ho ikopanya e entsoe ka tšepe e sa hloekang. | |
| 3.1 Boemo ba ka ntle: Lx W x H: 6000x1100x1000mm (e ka feto-fetoha) 3.2 Pompo ea Vacuum: pompo ea vacuum: 3x5.5KW; Sebaka sa tsoalo: Yuanli, Chaena 3.3 Pompo ea metsi: Pompo ea metsi: 1 × 4KW; Sebaka sa tsoalo: Guangzhou, China 3.4 Liphetoho tse tharo tsa tataiso: Ka pele le Ka morao ka enjene ea 0.75 Kw Boholo: ± 1000mm Holimo le tlase, ho le letšehali le ho le letona ho lokisoa ka letsoho Range: holimo le tlase: ± 150mm Ho tsamaea ka ho le letšehali le ka ho le letona: ± 50mm | |||||
| 4 | DYⅢQ Haul-off le cutter (e kopantsoeng) |  | 1 | 4.1 Ho tsamaea ka maoto 4.2 Sehahi | |
| 4.1 Ho tsamaea ka maoto Lebelo la ho hula: 0-3m / min; Matla a motlakase: 5.5KW; Bophara ba popane: 210mm; Bolelele ba popane: 2200mm; Pneumatic clamp; Amohela holip kapa ABB inverter; 4.2 Sehahi Matla a motlakase: 2.2KW; Matla a ho bokella matla a motlakase: 1.5KW; bophara ba sakha: 500mm; Sebaka sa ho itšeha: 200mm; Ka sesebelisoa sa ho bokella likhechana; | |||||
| 5 | Tafole ea ho fana |  | 1 | 5.1 Tafole ea likeletso: Bolelele Mokhoa oa ho laola Bophahamo ba ho lokisa | |
| Bolelele:6,000mm Mokhoa oa ho laola:Moea oa moea Ka li-screw ho lokisa bolelele ba bolelele:0 ~ 180mm | |||||
6.Ho kopanya lisebelisoa
1. Kopo:
Kopanya thepa e tala
2. Sephetho: ≤500
3. Likarolo tsa lisebelisoa:
① motsoako o chesang
② motsoako o pholileng
③ mochini o kenyang letsoho
4. Parameter
| Mohlala | / | Sehlopha sa motsoako oa SRL-Z300/600 | ||
 | ||||
| 1 | Motsoako o chesang | |||
| 2 | kakaretso ea molumo oa motsoako o chesang | L | 300 | |
| 3 | molumo o sebetsang oa motsoako o chesang | L | 225 | |
| 4 | boima ba lintho tse bonahalang/batch | ㎏/batch | ≤100 | |
| 5 | Sephetho | ㎏/h | ≤500 | |
| 6 | matla a motlakase | KW | 40/55, enjene ea lebelo le habeli | |
| 7 | matla a ho futhumatsa | KW | 12 | |
| 8 | hot mixer ho potoloha lebelo | r/mets | 475/950 | |
| 9 | Bongata ba lehare le tsosang | likhomphutha | 3 (1Cr18Ni9Ti) | |
| 10 | ho kopanya nako | min/batch | 8-10 | |
| motsoako o phodileng | ||||
| 1 | ho pholisa molumo oa mixer | L | 600 | |
| 2 | molumo o sebetsang oa motsoako o pholileng | L | 450 | |
| 3 | matla a motlakase | KW | 11 | |
| 4 | lintho tse entsoeng ka lehare la motsoako o pholileng | / | ZG1Cr18Ni9Ti | |
| 5 | lehare le tsitsinyang lebelo le potolohang | r/m | 130 | |
| 6 | phahamisa mokhoa oa ho laola | / | moea oa moea | |
| 7 | Mokhoa oa ho pholisa | / | pholiso ea metsi | |
| 8 | nako ea ho pholisa | min/batch | 10-12 | |
| Motlakase | ||||
| 1 | Khokahano ea AC | / | Schneider | |
| 2 | Selaoli sa mocheso | / | Omron | |
| Autoloader | ||||
| 1 | Bophara ba tube ea lipalangoang | mm | 101 | |
| 2 | Ho tjhaja matla a motlakase | KW | 1.5 | |
| 3 | Push material motor power | KW | 0.55 | |
| 4 | Bophahamo ba polokelo | kg | 80 | |
| 5 | Lisebelisoa tsa hopper ea polokelo le tube | / | Ts'epe e sa beng le mabali | |
7 Plastiki crusher (ho ikhethela)
Kopo: senya likarolo tsa PVC tsa litšila bakeng sa tšebeliso ea ho tsosolosoa
| mohlala | SWP-400 |
 | |
| Bophara ba mahare a potolohang | 400mm |
| Bongata ba lehare le potolohang | 5 |
| Lebelo le potolohang | 500r/mots |
| Bongata bo tsitsitseng ba lehare | 2 |
| Sekhahla sa skrine (mm) | 10 |
| Bokhoni ba ho senya | 350-450 lik'hilograma / hora |
| Matla(kw) | 13.2 |
| Molomo o fepa(mm) | 375*320 |
| Boima(kg) | 980 |
| Boholo(mm) | 2500*1200*2000 |
8. PVC pulverizer (boikhethelo)
Kopo: sila likotoana tsa PVC tse pshatlehileng hore e be phofo
 | |
| Bophara ba kamore e sithabetsang (mm) | 400 |
| Nomoro ea rotor | 3 |
| Lebelo le ka sehloohong la shaft(r/min) | 3400-3700 |
| Matla a motlakase (kw) | 30 |
| Matla a tlhahiso (kg/h) | 50-150 |
| Boima (kg) | 1000 |
Mohala oa phallo le tlhophiso bakeng sa mohala oa tlhahiso ea profil ea PVC
Kopo
E arotsoe ho latela mokhoa oa ho bula:
Fesetere e tsitsitseng, fensetere e ka holimo e emisitsoeng, fensetere e bohareng e leketlileng, fensetere e ka tlaase e leketlileng, fensetere e otlolohileng, fensetere e bulehileng e bataletseng, fensetere ea pulley, fensetere ea pulley, lemati le fensetere le bulehileng, lemati le fensetere, sutumetsa fensetere e bataletseng, lemati le menoang, selemo sa fatše. lemati, ho phahamisa lemati le thellang, lemati le menoang le sutumelletsang, lemati le thellang ka hare.
PVC Profile e na le litšobotsi tse kang karohano ea molumo, ho monya molumo, karohano ea mocheso, ho boloka mocheso, joalo-joalo.Thepa ha e chese, e bolokehile hore e ka sebelisoa.
Letoto lohle la lihlahisoa le na le thepa ea bopaki ba mongobo, bopaki ba hlobo, ho hanyetsa metsi, phello ea eona e thibelang ho sisinyeha ha eona e ntle.Letoto lohle la lihlahisoa le na le thepa ea bopaki ba boemo ba leholimo, khanya ea eona e ka lula e le teng ka ho sa feleng, ha ho bonolo ho tsofala.Sehlahisoa sena se bobebe, se boloka & sepalangoang, kaho e bonolo haholo.Sehlahisoa sena se ka sebetsoa ka lisebelisoa tse tloaelehileng tsa thepa ea lehong.Ho cheka, ho sakha, sepekere, planing, bonding ho ka etsoa joaloka thepa ea lehong.E loketse sebopeho sa mocheso, ho kobeha ha mocheso le ho sebetsa ho mena.E ka kopanngoa, e ka kopanngoa le lisebelisoa tse ling tsa PVC.Bokaholimo ba sehlahisoa sena bo boreleli, bo ka hatisoa.(Hloekisa bokaholimo pele u hatisa.)
